Green casting brings new opportunities to domestic equipment manufacturing industry

Release time:

2024-02-03

After the rapid development of domestic equipment manufacturing industry in recent years, China's foundry industry ranks in the forefront of the world in terms of the number of enterprises and casting output, accounting for 40% of the world's total casting output. The core gap between China and developed foundry countries is reflected in the gap between product quality level and development mode.

Among them, the gap of development mode is reflected in that our country's foundry industry is still in an extensive development mode as a whole. The material consumption and energy consumption of casting production are high, the waste generation and pollutant emission are high, the comprehensive utilization rate of resources is low, the on-site operation environment is bad, and the labor protection and safety production protection measures are not in place. This development mode does not meet the requirements of the country to build a resource-saving and environment-friendly society, it is an unsustainable development model.

On May 10, 2013, the Ministry of Industry and Information Technology issued the "access conditions for the Foundry Industry" to guide the optimization and upgrading of the industrial structure of the foundry industry, curb low-level repeated construction and blind expansion of production capacity, protect the ecological environment, promote energy conservation and emission reduction, improve the level of resource and energy utilization, enhance the overall strength of China's equipment manufacturing industry, and promote China's transformation from a big casting country to a casting power.

On September 9, 2014, the much-watched revised draft of the the People's Republic of China Air Pollution Prevention and Control Law began to solicit opinions. This is also a strict air pollution prevention and control law in my country. For example, the draft for comments stipulates that my country will establish heavy pollution weather monitoring and early warning The system must issue an early warning in time when heavy pollution weather such as severe smog may occur. Local governments will take measures such as ordering relevant companies to suspend production and limit production to initiate emergency response. From this, it can be seen that whether it is to adapt to the requirements of national laws, regulations and industrial policies, or to meet the needs of the development of the foundry industry, China's foundry industry needs to take a road of sustainable development of green foundry.

China's domestic fastening castings strive to achieve international standards

How much do you know about famous cars burned into aluminum ingots and aluminum bodies?

"Die Casting Weekly"-On June 2, 2022, Zhejiang Tianya Jiangtao Power Co., Ltd. ("Tianya Jiangtao") and Lijin Group Ningbo Lijin Technology Co., Ltd. ("Ningbo Lijin Technology") jointly held a signing ceremony for batch purchase of large die casting units and strategic cooperation. It is reported that Tianya Jiangtao will introduce 10 sets of 1250-6000T large intelligent die casting units from Ningbo Lijin Technology. Tianya Jiangtao Chairman Hu Ronghui, Vice President Zhao Hongfu, Factory Director Peng Wenjiang, Ningbo Lijin Technology General Manager Zhang Jun, Sales Director Zhou Kang and other leaders attended the signing ceremony.

What are the causes of direct defects in aluminum die castings?

After the completion of the production of aluminum die castings will appear some small defects such as bubbles, cracks and deformation and other phenomena, affecting our use, so what is the direct cause of these defects!

China's aluminum alloy die casting production continues to rise

In recent years, the output of aluminum alloy die castings in China has been rising, and the industry has developed rapidly, which is mainly due to the continuous casting orders in China, and the casting industry in China has also begun to be recognized and praised by foreign enterprises.

China will vigorously support the development of domestic die-casting and foundry industry

China's mechanical castings are in rapid development, with the slogan of the road of innovation advocated by our country, the continuous development of casting technology, and strive to occupy the independent research and development of technology and the right to use, in order to really lay a good foundation for the development of China's casting industry.