Die-casting aluminum alloy mesh wool wing solution

Release time:

2024-02-29

Features:

There are traces of protrusions or depressions like reticular hairs on the surface of die castings, which are continuously expanded and extended with the increase of die casting times.

Cause:

① die-casting mold cavity surface cracks; ② improper die-casting mold material or heat treatment process is not correct; ③ die-casting mold temperature change is large; ④ pouring temperature is too high; ⑤ die-casting mold preheating is insufficient; ⑥ cavity surface roughness.

Processing method:

① Correct selection of die casting mold materials and heat treatment process; ② The pouring temperature should not be too high, especially for high melting point alloys; ③ The mold should be fully preheated; ④ After the mold is manufactured, carry out low-temperature long-term aging treatment or chemical oxidation treatment on the surface; ⑤ Grind the surface of the formed part to reduce the surface roughness Ra value, Ra0.8 ~ Ra0.4;⑥ Reasonable selection of mold cooling method; ⑦.

Die-casting aluminum alloy cold isolation solution

Solution to Undercasting of Die Casting Aluminum Alloy

"Die Casting Weekly"-On June 2, 2022, Zhejiang Tianya Jiangtao Power Co., Ltd. ("Tianya Jiangtao") and Lijin Group Ningbo Lijin Technology Co., Ltd. ("Ningbo Lijin Technology") jointly held a signing ceremony for batch purchase of large die casting units and strategic cooperation. It is reported that Tianya Jiangtao will introduce 10 sets of 1250-6000T large intelligent die casting units from Ningbo Lijin Technology. Tianya Jiangtao Chairman Hu Ronghui, Vice President Zhao Hongfu, Factory Director Peng Wenjiang, Ningbo Lijin Technology General Manager Zhang Jun, Sales Director Zhou Kang and other leaders attended the signing ceremony.

What are the causes of direct defects in aluminum die castings?

After the completion of the production of aluminum die castings will appear some small defects such as bubbles, cracks and deformation and other phenomena, affecting our use, so what is the direct cause of these defects!

China's aluminum alloy die casting production continues to rise

In recent years, the output of aluminum alloy die castings in China has been rising, and the industry has developed rapidly, which is mainly due to the continuous casting orders in China, and the casting industry in China has also begun to be recognized and praised by foreign enterprises.

China will vigorously support the development of domestic die-casting and foundry industry

China's mechanical castings are in rapid development, with the slogan of the road of innovation advocated by our country, the continuous development of casting technology, and strive to occupy the independent research and development of technology and the right to use, in order to really lay a good foundation for the development of China's casting industry.