Die-casting aluminum alloy cold isolation solution

Release time:

2024-02-29

Features:

The surface of the die casting has obvious, irregular, sunken linear lines (penetrating and non-penetrating). The shape is small and narrow, and some of the transition edges are smooth, which may develop under the action of external force.

Cause:

① The two metal flows are butted with each other, but they are not completely fused and there is no inclusion between them, and the bonding force of the two metals is very weak; ② The pouring temperature or die-casting mold temperature is low; ③ Improper alloy selection, poor fluidity; ④ The runner is not positioned correctly or the flow path is long; ⑤ The filling speed is low, and the injection ratio is low.

Processing method:

① Increase the pouring temperature and mold temperature appropriately; ② Increase the injection pressure to shorten the filling time; ③ Increase the injection speed and increase the cross-sectional area of the inner gate at the same time; ④ Improve the exhaust and filling conditions; ⑤ Correct selection of alloys to improve alloy fluidity.

Deformation Solution of Die Casting Aluminum Alloy

Die-casting aluminum alloy mesh wool wing solution

"Die Casting Weekly"-On June 2, 2022, Zhejiang Tianya Jiangtao Power Co., Ltd. ("Tianya Jiangtao") and Lijin Group Ningbo Lijin Technology Co., Ltd. ("Ningbo Lijin Technology") jointly held a signing ceremony for batch purchase of large die casting units and strategic cooperation. It is reported that Tianya Jiangtao will introduce 10 sets of 1250-6000T large intelligent die casting units from Ningbo Lijin Technology. Tianya Jiangtao Chairman Hu Ronghui, Vice President Zhao Hongfu, Factory Director Peng Wenjiang, Ningbo Lijin Technology General Manager Zhang Jun, Sales Director Zhou Kang and other leaders attended the signing ceremony.

What are the causes of direct defects in aluminum die castings?

After the completion of the production of aluminum die castings will appear some small defects such as bubbles, cracks and deformation and other phenomena, affecting our use, so what is the direct cause of these defects!

China's aluminum alloy die casting production continues to rise

In recent years, the output of aluminum alloy die castings in China has been rising, and the industry has developed rapidly, which is mainly due to the continuous casting orders in China, and the casting industry in China has also begun to be recognized and praised by foreign enterprises.

China will vigorously support the development of domestic die-casting and foundry industry

China's mechanical castings are in rapid development, with the slogan of the road of innovation advocated by our country, the continuous development of casting technology, and strive to occupy the independent research and development of technology and the right to use, in order to really lay a good foundation for the development of China's casting industry.